Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
control systems vtu notes for 4th sem ece doc
#1
Smile 

Please provide me control system vtu notes for 4 the sem ec
Reply
#2

A control system manages, orders, directs or regulates the behavior of other devices or systems using control loops. It can range from an individual heating controller that uses a thermostat that controls a domestic boiler to large industrial control systems that are used to control processes or machines.

For continuously modulated control, the feedback control system is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) controlled with the desired value or set point (SP), and applies the difference as a control signal to carry the variable process output the plant at the same value as the control signal. For sequential and combinatorial logic, software logic is used, as in a programmable logic controller.

There are two common classes of control action, open loop control systems and closed loop control systems. In an open loop control system, the control action of the controller is independent of the "process output". A good example of this is a central heating boiler controlled only by a timer, so that the heat is applied for a constant time, regardless of the temperature of the building. (The control action is the boiler on / off. The process variable is the build temperature).

In a closed-loop control system, the control action of the controller depends on the desired and actual process output values. In the case of boiler analogy, this will use a thermostat to control the temperature of the building and therefore will feed back a signal to ensure that the output of the controller maintains the temperature of the building to that set in the thermostat.

Therefore, a closed loop controller has a feedback circuit which ensures that the controller exerts a control action to control a process variable with the same value as the "reference input" or "setpoint" (SP) . For this reason, closed loop controllers are also called reaction controllers.
Reply

Marked Categories : ece control system 4th sem, control systems seminar 4th sem, control systems vtu notes for 4th sem ece,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  sunstar exam scanner 5th sem cse pdf Guest 0 23 20-12-2018, 05:30 PM
Last Post: Guest
  7th sem cse notes Guest 0 17 26-11-2018, 07:13 PM
Last Post: Guest
  8thsem civil advanced concrete technology sjbit notes pdf Guest 1 22 23-11-2018, 01:04 AM
Last Post: Guest
  sunstar scanner 3rd sem cse download pdf Guest 0 15 26-06-2018, 09:04 AM
Last Post: Guest
  sunstar exam scanner 6th sem cse pdf Guest 0 18 19-06-2018, 08:38 AM
Last Post: Guest
  sunstar exam scanner 6th sem ece pdf Guest 0 16 13-06-2018, 02:43 PM
Last Post: Guest
  pavement design 10cv833 pdf notes vtu Guest 0 58 17-05-2018, 02:49 PM
Last Post: Guest
  hindi steno rishi pranali notes Guest 0 8 08-04-2018, 02:36 PM
Last Post: Guest
Thumbs Up congestion control using nbp uml diagrams Guest 0 10 23-03-2018, 02:06 PM
Last Post: Guest
  vtu 6th sem ece sunstar scanner pdf Guest 0 10 18-03-2018, 11:25 PM
Last Post: Guest
This Page May Contain What is control systems vtu notes for 4th sem ece doc And Latest Information/News About control systems vtu notes for 4th sem ece doc,If Not ...Use Search to get more info about control systems vtu notes for 4th sem ece doc Or Ask Here

Options: