Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Post: #1


.doc  CASTING.doc (Size: 920.5 KB / Downloads: 201)


Since the evolution of mankind, man has used his intelligence and creative instinct to develop things that will reduce his labour. He shaped bowls, tools and weapons out of stones and wood which was naturally found in nature.With the passage of time he discovered other element in nature like gold, silver and copper which were readily available in nature in the form of nuggets. He melted and shaped these metal according to his desires. He probably discovered gold pebbles with stone and copper from the copper bearing ores that line the fire pits. He found it easy to melt the iron, copper and gold using the firewoods and charcoal, and hence in differerent ages iron and copper became the most profusely used natural materials.

Metal Castings

A metal casting can be defined as a metal object formed when molten metal is poured into a mould which contains a cavity of the desired shape and is allowed to solidify.
The casting process is used most often to create complex shapes that would otherwise be difficult or impossible to make using conventional manufacturing practices.


To rectify the defects like gas and shrink porosity within the casting; casting geometry is used as a tool. A foundry engineer studies the geometry of the part and plans to control the heat removal process within the casting structure and to improve the eminence of the casting. However, to identify the best possible geometry to adhere to solidification shrinkage requirements of the casting is required.


Identifying the best possible geometry can be an easy task in some alloys and can be a real difficult task in others where high technical design is required. In such case, where obtaining geometry requires skilled jobs, the foundry engineers work on “thermal trickery” to draft flow of energy in the form of fluids, and capture heat transfer patterns.

Characteristics affecting casting geometry:

There are various physical and mechanical characteristics, which affects the geometry of the castings. The physical characters effecting geometry of the designs are life of the fluid being used, shrinkage of the component while undergoing shrinkage process, slag formation affinity and pouring temperatures.


It's the science of making an original pattern or form which will be used to make a mold. The mold will allow for mass production of the original pattern by poring some sort of casting material such as metal, resin, plaster, or other material. A pattern can be both simple and complex for e.g an object that has detail on only one side like a plaque, or with detail on all sides, like a machine part. Factors that go into making a pattern includes durability, shrinkage, machine allowances, draft and undercuts.
In sand casting, the pattern is usually of wood, whereas it may be of metal or other materials in pressure or centrifugal casting. The patternmaker also decides where the sprues and risers (inlet and outlet for molten material) will be placed with respect to the pattern. Objects which have holes or depressions in some of its parts are taken care of by inserting cores. Sometimes patterns may also contain chills, solid pieces of the final material, to enable rapid cooling, resulting in quench hardening in the neighborhood of the chill.
Post: #2

.ppt  Casting Process....ppt (Size: 2.75 MB / Downloads: 157)

Turbine Blades for Jet Engines

Turbine blades for jet engines, manufactured by three different methods: (a) conventionally cast; (b) directionally solidified, with columnar grains, as can be seen from the vertical streaks; and © single crystal. Although more expensive, single crystal blades have properties at high temperatures that are superior to those to those of other blades. Source: Courtesy of United Technology Pratt and Whitney.

Casting Process


any intricate shape can be cast
any ferrous or non ferrous metals & alloys are castable
Tools required for casting molds are simple & inexpensive

Grains of a Two-Phase System

(a) Schematic illustration of grains, grain boundaries, and particles dispersed throughout the structure of a two-phase system, such as lead-copper alloy. The grains represent lead in a solid solution of copper, and the particles are lead as a second phase. (b) Schematic illustration of a two-phase system consisting of two sets of grains: dark and light. Dark and light grains have their own compositions and properties, respectively.

Steps in making Sand Casting

Pattern making
Core making
Melting and pouring
Cleaning of the cast products

Marked Categories : seminar topic casting, seminar topic casting process, introduction to casting processes pdf, seminar reporet on sand casting, introduction of casting process, introduction of casting ppt, ppt casting alloys, seminar topics on casting, pattern making process, seminars only mechanical on castings, seminar topics casting, introduction to casting process ppt, introduction to casting process, introduction to casting processes, seminer for casting, best siminar casting, iron box casting process project, seminer topic for casting, seminar topics for resin casting process, casting process seminar reports, sand casting defects, introduction to casting, casting process,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MANUFACTURING PROCESS OF A PISTON ppt study tips 2 7,098 17-01-2018 10:51 AM
Last Post: dhanabhagya
  Metal Casting and Foundry seminar flower 2 2,878 12-01-2018 10:50 AM
Last Post: dhanabhagya
  ppt on seminar of aluminium casting process making piston Guest 1 202 18-11-2017 11:14 AM
Last Post: jaseela123
  ppt on seminar of aluminium casting process making piston Guest 1 167 17-11-2017 01:29 PM
Last Post: jaseela123
  project on process costing of amul pdf Guest 1 176 17-11-2017 11:35 AM
Last Post: jaseela123
  centrifugal casting full seminar report Guest 1 0 07-11-2017 10:23 AM
Last Post: jaseela123
  pdf download for 12th class project of partnership firm process and procedure Guest 16 4,213 20-10-2017 01:35 PM
Last Post: Sanjana mondal
  sprocket manufacturing process ppt Guest 1 198 14-10-2017 03:14 PM
Last Post: jaseela123
  mmc al fly ash composite stir casting project report Guest 1 252 14-10-2017 02:34 PM
Last Post: jaseela123
  ghee production process ppt Guest 1 221 13-10-2017 02:38 PM
Last Post: jaseela123
This Page May Contain What is INTRODUCTION OF CASTING PROCESS And Latest Information/News About INTRODUCTION OF CASTING PROCESS,If Not ...Use Search to get more info about INTRODUCTION OF CASTING PROCESS Or Ask Here