Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
mechanical engineering research topics and papers
Post: #1

1. Manufacturing Optimisation + Quality Improvement for Small Orifice Manufacture in Engine Components
2. Effect of Vibration in Cancer Cells -
3. Optimum Tool Paths for Two and Half Milled Components
4. Investigation of lubrication and wear in engines using acoustic emission
5. Moulding of a fan blade composite material using various manufacturing processes
6. A Study of the Thermal Error in Turning Due to Cutting Tool Expansion
7. Transport of Non-physical Variables for Multiphase-change & Solidification Modelling
8. The Effect of Particulate Geometry and Quality on Direct Laser Deposition
9. Development of Smart Cloth
10. Investigation of Osteoporosis in the Biomechanical Performance of the Dynamic Distraction Frame
11. Design Analysis & Synthesis of a Non-conventional Parallel Manipulator with Innovative Joints
12. Statistical process control of thermal spray coatings using acoustic emission
13. An Investigation of Heat Partition in High Speed Machining Using Uncoated and Coated Tools
14. Laser Cutting of Carbon Fibre Composite Materials
15. Modelling Of Laser Cutting Striation Formation
16. Carbon Dioxide Storage
17. Physics-based modelling for analysis and diagnostics
18. The Design and Evaluation of Variable Fuel-Placement Airblast Atomizers
19. Development of a New, Multiple Pulsed Percussion Laser Drilling Mathematical Model
20. Improved Modelling of Fires
21. Dynamic Behaviour of Cellular Solids
22. Spray Modelling Without Droplet Size Segregation
23. Laser Cleaning of Micro-Slots and Cracks
24. Fabrication of Cu-H13 Tool Steel Parts Using Selective Laser Melting (SLM) Technique
25. Single Molecule Detection using Micro and Nano Systems
26. Reliability of an Utility Plant
27. Crashworthiness of Sandwich Panels
28. Creep Lifetime Predictions of Welded Structures Using Parallel Processing Algorithms
29. Residual Stresses Induced with Thermal Spraying
30. Thermal Transport Modelling of Woven Ceramic Matrix Composites
31. A Study of Electro-Discharge Drilling using gas dieiectrics
32. A Novel Model to Aid Femoral Derotational Osteotomy Surgery
33. Finite Element Analysis of Cutting Tool Boundary Effects in Dry High Speed Machining
34. Dynamics of Long Rod Penetration
35. A Methodology for Modelling Fluid-Structure Interaction Applied to Turbine Fan Blades
36. Photodynamic Therapy on Keloids
37. An Investigation into the Use of the Ilizarov Frame for the Correction of congenital Talipes Equinovarus (clubfoot)
38. High Speed Fibre Laser Cutting and Machining
39. Laser Surface Texturing and Coating of Ti-6Al-4V for Improving Biocompatibility
40. Foam-Filled Corrugated Board Manufacture
41. Experimental & Finite Element Modelling of High Speed Machining Process: Establishing Integrity of Model Inputs
42. Numerical Simulation of Laser Direct Metal Deposition Flow Processes
43. An Extendible Computer-Aided Process Planning System for Turn - Milled Components
44. The Effect of the Skin Tension on the Formation of Keloid Scars - PhD Student - Edna Suarez Pozos
45. Modelling of Mass Addition for Laser Direct Deposition
46. Simulation of Human Model - PhD Student
47. Force Modelling in High Speed Ball End Milling
48. In-Process Electrochemical Discharge Dressing of Metal-Bonded Diamond Grinding Wheels
49. Photovoltaics and Solar Energy: Renewable-energy Powered Desalination Systems
50. Mechanical Behaviour of Rubber Toughened Polymers over a Wide Range Of Strain Rate and Temperature
51. Spray Modelling
52. The Effects of Rayleigh Waves on Improving the Surface Finish of Castings
53. Integrated Information Systems to Support Quality Management
54. The Influence of the Osteoporosis in The Mechanical Behavior of Hip Replacements
55. Fast Track Design and Reliability of Total Care Systems
56. Design of a 5-axis micromachining centre
57. Optical Engineering
58. Statistical Experimental Analysis of a Two-Fluid Sprayer and Its Use to Develop the Number Size Distribution Moments Model of Sprays
59. Surfaces, Materials and Monitoring
60. Size Effect in Micro-Mechanical Machining -
61. Nanocomposite material and coating design for micro-sensor and microacturator applications
62. Modelling & Failure Analysis of Ferritic Steel Used in Pressure Vessels & Piping Applications
63. Performance Improvement of MEMs Sensor in Vibration Based Diagnosis
64. Inspection of Micro-Scale Components Using Reverse Engineering Techniques
65. The Use of Parameter Identification Methods for the Condition Monitoring of Electric Motor Drives
66. Crack-Free Laser Cutting of Thick-Section Ceramic Materials
67. Optimisation of Low Concentrating Line-axis Dielectric Photovoltaic Concentrator
68. Structural Heath Monitoring
69. Stratified Multi-Phase Flow Behaviour in Vertical and Horizontal Pipes
70. Design, Manufacture and Robotics
71. Design & Manufacture of Electromagnetically Unobtrusive Composite Radome Structures
72. New Materials and Processes for Micro- and Nano-Devices
73. Turbulence Modelling for Free-Surface and Costal Flow Simulations
74. A Study of Intelligent Pulsating Blankholder Technology for Deep Drawing
75. The Computation Three-Dimensional, Time-Dependent Flows in Rotating Cavities, using High-Reynolds-number Models of Turbulence
76. BioMEMS for Cell Studies
77. Optimisation of Laser Forming Process for Tube/Sheet Bending
78. Modular Design Principles for Bespoke Mechatronic Control Systems
79. The Laser Cleaning of Aerospace Titanium Alloys for Joining
80. An Efficient Solution for Scheduling Preventive Maintenance Tasks of Cogeneration Plants Using Integer Programming and Simulation
81. Fibre Laser Cutting of Stents
82. Laser Cutting of Material of Non-Uniform Thickness
83. Modelling and Analysis of Melt Pool Effects in Laser Cladding
84. Effect of Non-Conventional Beam Geometry in Laser Processing of Engineering Materials
85. Modelling Surface Waves Using The Hypersingular Boundary Element Method
86. Reliability and Maintainability of High Speed Packaging
87. Compressor fault detection and management
88. Combined Wire and Powder Deposition in Direct Laser Metal Additive Manufacturing
89. Microfluidic lab-on-chip device based on acoustic wave technology
90. Oscillating vapour bubbles and heat transfer
91. Mode Transformation in Carbon Nanotubes
92. Vibration Diagnosis of Blades of Rotating Machines
93. Laser Drilling Of Cooling Holes for Aeroengine Components
94. Breast Implant Surface Development
95. Design Optimisation & Health Monitoring Techniques for Composite Structures
96. Thermoacoustic Technologies for Energy and Building
97. Heat transfer in magnetic liquids
98. An Investigation of Tool Chip Contact Length and Phenomena in High Speed Turning Using Uncoated and Coated Tools
99. The Modeling and Practice of Multiple Track Laser Direct Metal Deposition (LDMD) -
100. Three-Dimensional Imaging for Atomisation & Sprays
101. Combined Laser and Mechanical Micro-Drilling of Nickel-Base Super-Alloy
102. Micro Milling of Hardened Tool Steel: Process Fundamentals & Extended Life Tool Coatings
103. Manufacture of Advanced Carbon Fibre Composites by Resin Transfer Moulding of Preforms
104. Speed Based Fault Detection for Large Diesel Engine Applications
105. Energy Technology, Heat Transfer and Fluid Mechanics
106. Local Impact Effects of Hard Projectiles on Concrete Targets
107. Large Eddy Simulation of Buoyant Flows
108. Renewable Energy
109. BioMEMS and Nanotechnology
110. Microdeivces based on shape memory alloys and polymers for biological applications
111. Modelling of Cutting Forces in High Speed Ball-end Milling
112. Development of Smart Ankle-Foot-Orthosis
113. Electrical Dressing of Grinding Wheels
114. Investigation on the Mechanisms of the Strain Growth Phenomenon in Containment Vessels Subjected to Internal Blast Loading
Post: #2
I want to research on manufacturing related processes
Post: #3
hello i m rahul soni
in indore
i running in mech. engg in a private collage
pls give any suggetion
contect nomber -9584095083
Post: #4
to get information about the topic "mechanical engineering" full report ppt and related topic refer the link bellow
Post: #5
hi sir iam anil studyed mechanical i want new mechanical project about thermodynamics plg send my email:kanilkumar224[at]
Post: #6
to get information about the topic "mechanical engineering phd research ideas" full report ppt and related topic refer the link bellow
Post: #7
great ideas
Although i was wondering if you have any newer ideas for more of a mechatronics type of a course
thank you
contact info : aryanm94[at]
Post: #8
to get information about the topic "mechanical engineering research topics" full report ppt and related topic refer the link bellow
Post: #9
dear sir any new topic in mechanical department and new research of ic engine thermal, heat and mass transfer hydraulic and pneumatic
Post: #10
To get full information or details of mechanical engineering research topics and papers please have a look on the pages

if you again feel trouble on mechanical engineering research topics and papers please reply in that page and ask specific fields in mechanical engineering research topics and papers
Post: #11
Please suggest me some phd research topics related to Blast furnace process/equipments/new developments.

Post: #12
To get full information or details of mechanical engineering research topics and papers please have a look on the pages

if you again feel trouble on mechanical engineering research topics and papers please reply in that page and ask specific fields in mechanical engineering research topics and papers
Post: #13
I want research paper on rope making machine
Post: #14
hello sir plz give me mechanical eng. research paper ideas
Post: #15
To get full information or details of mechanical engineering research topics and papers please have a look on the pages

if you again feel trouble on mechanical engineering research topics and papers please reply in that page and ask specific fields in mechanical engineering research topics and papers

Marked Categories : ball milling, research papers on meachanical engineering, research paper topics for mechanical engineer, current reserch topics in mechanical engineering field, smart ankle foot orthosis, new research topics in mechanical engineering, research papers for mechanical engineering, research papers topics for mechanical, research papers of mechanical engineering, current research topics in mechanical engineering, mechanical research paper topics, research papers mechanical engineering, paper presentaion topics for mech engineers, a methodology for modelling fluid structure interaction applied to turbine fan blades, research papers in mechanical engineering,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  network analysis book engineering 3rd semester by pm chandrashekaraiah pdf Guest 0 0 21-10-2018 06:37 AM
Last Post: Guest
  pdf sample of a filled mechanical engineering student siwes logbook Guest 0 0 17-08-2018 10:04 AM
Last Post: Guest
  credit seminar topics for msc vegetables science Guest 0 0 07-08-2018 10:20 AM
Last Post: Guest
  list of seminar topics under ethnobotany Guest 0 0 04-08-2018 06:42 PM
Last Post: Guest
  a big electronics projects list for diploma or engineering students project topics 5 64,724 17-06-2018 09:45 AM
Last Post: bjansspetrov4319
  siwes report for automobile engineering Guest 0 0 16-04-2018 05:50 AM
Last Post: Guest
  industrial engineering and management project ideas project topics 1 109,831,179 16-02-2018 02:42 PM
Last Post: tinasingh
  seminar topics on parasitology ppt Guest 0 0 16-02-2018 03:14 AM
Last Post: Guest
  attending lectures on different geological techniques and geophysical techniques and subine 2 65 24-01-2018 12:34 AM
Last Post: RamiJer
  project ideas for diploma students in mechanical Guest 1 0 17-01-2018 11:19 AM
Last Post: dhanabhagya
This Page May Contain What is mechanical engineering research topics and papers And Latest Information/News About mechanical engineering research topics and papers,If Not ...Use Search to get more info about mechanical engineering research topics and papers Or Ask Here