Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Thread Rating:
• 0 Votes - 0 Average
• 1
• 2
• 3
• 4
• 5
 sinusoidal loading abaqus tutorials
Post: #1

hi
how i can model a plate with the Sin(pi*x/a)*Sin(pi*y/b) load function.?
Post: #2
1. First you should define the function as follows (the function name is "current" that you can change it according to your case)
! The equation is: "1000*((sin(100*{PI}*{TIME})^2)^(0.5))"
*DEL,current
*DEL,_FNCNAME
*DEL,_FNCMTID
*DEL,_FNCCSYS
*SET,_FNCNAME,'current'
*SET,_FNCCSYS,0
*DIM,%_FNCNAME%,TABLE,6,12,3,,,,%_FNCCSYS%
! Begin of equation: {TIME}
*SET,%_FNCNAME%(0,0,1), 0.0, -999
*SET,%_FNCNAME%(2,0,1), 0.0
*SET,%_FNCNAME%(3,0,1), 0.0
*SET,%_FNCNAME%(4,0,1), 0.0
*SET,%_FNCNAME%(5,0,1), 0.0
*SET,%_FNCNAME%(6,0,1), 0.0
*SET,%_FNCNAME%(0,1,1), 1.0, 99, 0, 1, 1, 0, 0
*SET,%_FNCNAME%(0,2,1), 0
*SET,%_FNCNAME%(0,3,1), 0
*SET,%_FNCNAME%(0,4,1), 0
*SET,%_FNCNAME%(0,5,1), 0
*SET,%_FNCNAME%(0,6,1), 0
*SET,%_FNCNAME%(0,7,1), 0
*SET,%_FNCNAME%(0,8,1), 0
*SET,%_FNCNAME%(0,9,1), 0
*SET,%_FNCNAME%(0,10,1), 0
*SET,%_FNCNAME%(0,11,1), 0
*SET,%_FNCNAME%(0,12,1), 0
! End of equation: {TIME}
! Begin of equation: 1000*((sin(100*{PI}*{TIME})^2)^(0.5))
*SET,%_FNCNAME%(0,0,2), 0.2, -999
*SET,%_FNCNAME%(2,0,2), 0.0
*SET,%_FNCNAME%(3,0,2), 0.0
*SET,%_FNCNAME%(4,0,2), 0.0
*SET,%_FNCNAME%(5,0,2), 0.0
*SET,%_FNCNAME%(6,0,2), 0.0
*SET,%_FNCNAME%(0,1,2), 1.0, -1, 0, 100, 0, 0, 0
*SET,%_FNCNAME%(0,2,2), 0.0, -2, 0, 3.14159265358979310, 0, 0, -1
*SET,%_FNCNAME%(0,3,2), 0, -3, 0, 1, -1, 3, -2
*SET,%_FNCNAME%(0,4,2), 0.0, -1, 0, 1, -3, 3, 1
*SET,%_FNCNAME%(0,5,2), 0.0, -1, 9, 1, -1, 0, 0
*SET,%_FNCNAME%(0,6,2), 0.0, -2, 0, 2, 0, 0, -1
*SET,%_FNCNAME%(0,7,2), 0.0, -3, 0, 1, -1, 17, -2
*SET,%_FNCNAME%(0,8,2), 0.0, -1, 0, 0.5, 0, 0, -3
*SET,%_FNCNAME%(0,9,2), 0.0, -2, 0, 1, -3, 17, -1
*SET,%_FNCNAME%(0,10,2), 0.0, -1, 0, currcons, 0, 0, -2
*SET,%_FNCNAME%(0,11,2), 0.0, -3, 0, 1, -1, 3, -2
*SET,%_FNCNAME%(0,12,2), 0.0, 99, 0, 1, -3, 0, 0
! End of equation: 1000*((sin(100*{PI}*{TIME})^2)^(0.5))
! Begin of equation: 1e-6
*SET,%_FNCNAME%(0,0,3), 1, -999
*SET,%_FNCNAME%(2,0,3), 0.0
*SET,%_FNCNAME%(3,0,3), 0.0
*SET,%_FNCNAME%(4,0,3), 0.0
*SET,%_FNCNAME%(5,0,3), 0.0
*SET,%_FNCNAME%(6,0,3), 0.0
*SET,%_FNCNAME%(0,1,3), 1.0, 99, 0, 1e-6, 0, 0, 0
*SET,%_FNCNAME%(0,2,3), 0
*SET,%_FNCNAME%(0,3,3), 0
*SET,%_FNCNAME%(0,4,3), 0
*SET,%_FNCNAME%(0,5,3), 0
*SET,%_FNCNAME%(0,6,3), 0
*SET,%_FNCNAME%(0,7,3), 0
*SET,%_FNCNAME%(0,8,3), 0
*SET,%_FNCNAME%(0,9,3), 0
*SET,%_FNCNAME%(0,10,3), 0
*SET,%_FNCNAME%(0,11,3), 0
*SET,%_FNCNAME%(0,12,3), 0
! End of equation: 1e-6
2. Then you should apply the load on nodes:
FLST,2,1,1,ORDE,1
FITEM,2,429
/GO
F,P51X,AMPS,%current%
! %current% is in fact the sinusoidal load that defined as a table
 « Next Oldest | Next Newest »

Quick Reply
Message
Type your reply to this message here.

Image Verification
 (case insensitive) Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

 Possibly Related Threads... Thread: Author Replies: Views: Last Post aradhya tutorials notes for cse 7th sem vtu Guest 1 287 06-01-2018 01:24 PM Last Post: dhanabhagya aradhya tutorials notes for 6th sem cse Guest 0 0 30-09-2017 10:18 AM Last Post: Guest irc bridge loading ppt Guest 1 181 19-09-2017 03:16 PM Last Post: jaseela123 A Series Active Power Filter Based on a Sinusoidal Current-Controlled Voltage-Source project uploader 1 1,291 14-09-2017 03:47 PM Last Post: jaseela123 effect of rate of loading on settlements subine 1 80 09-09-2017 01:09 PM Last Post: jaseela123 Linking & Loading PPT project girl 1 396 06-09-2017 02:56 PM Last Post: jaseela123 influence of wastewater type on loading and performance of an anaerobic process subine 1 76 30-08-2017 11:55 AM Last Post: jaseela123 Correlation of Sinusoidal Sweep Test to Field Random Vibrations mechanical wiki 0 8,165,842 25-08-2017 09:32 PM Last Post: mechanical wiki Measurement of Grinding Wheel Loading Using Thresholding Technique mkaasees 0 0 09-11-2016 12:55 PM Last Post: mkaasees EFFECTS OF DYNAMIC LOADING ON THE MECHANICAL BEHAVIOR OF TOTAL HIP PROSTHESIS mkaasees 0 0 25-10-2016 11:48 AM Last Post: mkaasees
This Page May Contain What is sinusoidal loading abaqus tutorials And Latest Information/News About sinusoidal loading abaqus tutorials,If Not ...Use Search to get more info about sinusoidal loading abaqus tutorials Or Ask Here

Options: